Configure Wep - D-Link DIR-280 User Manual

Secton 4 - Securty
It s recommended to enable encrypton on your wreless router before your wreless network adapters. Please establsh
wreless connectvty before enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added
overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click
on Wireless Setup on the left sde.
2. Next to Security Mode, select Enable WEP Wireless Security (basic).
3. Next to Authentication, select either Shared Key or Open
Key s recommended as t provdes greater securty when WEP s
enabled.
4. Select ether 64Bit or 128Bit encrypton from the drop-down menu
next to WEP Encryption.
5. Next to Next to Default Key Type, select WEP Key 1 and enter a WEP key that
you create. Make sure you enter this key exactly on all your wireless
devces. You may enter up to four dfferent keys ether usng Hex or
ASCII. Hex is recommended (letters A-F and numbers 0-9 are valid). In
ASCII all numbers and letters are vald. .
6. Clck Save Settings to save your settings. If you are configuring the
router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key
as you dd on the router.
D-Lnk DIR-280 User Manual

Configure WEP

Open. Shared
46