Dhcp Server Settings - D-Link DIR-280 User Manual

Section 3 - Configuration
DHCP stands for Dynamc Host Control Protocol. The
DIR-280 has a bult-n DHCP server. The DHCP Server
wll automatcally assgn an IP address to the computers on
the LAN/prvate network. Be sure to set your computers
to be DHCP clents by settng ther TCP/IP settngs to
"Obtan an IP Address Automatcally." When you turn
your computers on, they will automatically load the proper
TCP/IP settngs provded by the DIR-280. The DHCP
Server wll automatcally allocate an unused IP address
from the IP address pool to the requestng computer. You
must specfy the startng and endng address of the IP
address pool.
Enable DHCP
Check the box to enable the DHCP server on your
Server:
router. Uncheck to dsable ths functon.
DHCP IP
Enter the startng and endng IP addresses for the
Address Range:
DHCP server's IP assgnment.
DHCP Lease
The length of tme for the IP address lease. Enter the
Time:
Lease tme n mnutes.
D-Lnk DIR-280 User Manual

DHCP Server Settings

27