Lan Setup - D-Link DIR-280 User Manual

Section 3 - Configuration
This section will allows you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address: IP Address:
Enter the IP address of the router. The default IP
address s 192.168.0.1.
NOTE:-If you change the IP address, once you
clck Apply, you will need to enter the new IP
address n your browser to get back nto the
configuration utility.
Default Subnet
Enter the Subnet Mask. The default subnet mask
Mask:
s 255.255.255.0.
Enable DNS Relay:
Tick the box to transfer the DNS server information
from your ISP to your computers. If unchecked,
your computers wll use the router for a DNS
server.
Refer to the next page for DHCP information.
D-Lnk DIR-280 User Manual

LAN Setup

26