Omron FQ-CR1 User Manual page 168

Test Tab Page
Menu command
Continuous test
Graphic
Graphics + Details
All results/Region
Trend Monitor
Histogram
Adjust
judgement
Auto
adjustment
Method
Auto display
(trend monitor and
histogram only)
Display range
(trend monitor and
histogram only)
Number of data
(trend monitor only)
Number of data
(histogram only)
Save data
Run Tab Page (from Setup Display)
Menu command
Switch to Run mode
166
Menu Tables
Description
Used to check the individual judgement
results for the inspection items and to
adjust the judgement parameters.
Displays the input image.
Displays the inspection item individual
judgement results and measurement val-
ues.
Displays the inspection item individual
judgement results for all inspection
items.
Displays the individual judgement results
saved in the Sensor in a trend monitor.
Displays the individual judgement results
saved in the Sensor in a histogram.
Adjusts judgement parameters without
stopping measurements.
Automatically adjusts the judgement
parameters by using actual workpieces
which are considered as good or faulty
products.
Selects the expression to use to auto-
matically adjust the judgement parame-
ters.
Same as the trend monitor and histogram for [Run] Mode.
Saves scene data and system data.
Description
Switches to Run Mode.
Setting range
---
---
OK Teach, NG Teach
Threshold (minimum), Threshold (aver-
age) (default), or Threshold (maximum)
---
Setting range
---
Data Refer-
ence
--- p. 72
p. 76
p. 72
Scene p. 75
--- p. 84
p. 85
p. 84
p. 85
--- p. 77
Data Refer-
ence
--- p. 80
FQ User's Manual