Cruise Control; Using Cruise Control - Ford 2015 FLEX Owner's Manual

Hide thumbs Also See for 2015 FLEX:

Table of Contents

PRINCIPLES OF OPERATION

Cruise control lets you maintain a set speed without keeping your foot

on the accelerator pedal.

WARNING: Do not use cruise control in heavy traffic, on

winding roads or when the road surface is slippery. This could

result in loss of vehicle control, serious injury or death.

WARNING: When you are going downhill, your vehicle speed

may increase above the set speed. The system will not apply the

brakes. Change down a gear to assist the system in maintaining the set

speed. Failure to do so could result in loss of vehicle control, serious

injury or death.

Note: Cruise control will disengage if your vehicle speed decreases more

than 10 mph (16 km/h) below your set speed while driving uphill.

Switching Cruise Control On

Press the ON control up and release.

The indicator will appear in the instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press the SET control upward and release.

3. Take your foot off the accelerator pedal.

The indicator will change colors in the instrument cluster.

2015 Flex (471)

Owners Guide gf, 1st Printing, October 2014

Cruise Control

The cruise controls are located on

the steering wheel.

Table of Contents