Ford 2015 FLEX Owner's Manual page 227

Hide thumbs Also See for 2015 FLEX:

Table of Contents

WARNING: When manual zoom is on, the full area behind the

vehicle is not shown. Be aware of your surroundings when using

the manual zoom feature.

Note: Manual zoom is only available when the transmission is in R

Note: When manual zoom is enabled, only the centerline is shown.

Allows the driver to get a closer view of an object behind the vehicle.

The zoomed image keeps the bumper in the image to provide a

reference. The zoom is only active while the transmission is in R

(Reverse), When the transmission is shifted out of R (Reverse), the

feature automatically turns off and must be reset when it is used again.

Selectable settings for this feature are OFF and ON. Press the zoom

button to change the view. The default setting for the manual zoom is

Rear Camera Delay

When shifting the transmission out of R (Reverse) and into any gear

other than P (Park), the camera image remains in the display until the

vehicle speed reaches 6 mph (10 km/h). This occurs when the rear

camera delay feature is on, or until a radio button is selected.

Selectable settings for this feature are ON and OFF. The default setting

for the rear camera delay is OFF.

2015 Flex (471)

Owners Guide gf, 1st Printing, October 2014

Parking Aids

Chapters

Table of Contents