Checking The Tire Pressure; Checking The Skids And Scraper; Checking The Traction Drive Operation - Toro Power Max Heavy Duty 1128 OHXE 38803 Operator's Manual

Use automotive detergent oil with an API service classification
of SF, SG, SH, SJ, SL, or higher. Refer to your engine owner's
manual.
Use Figure 18 below to select the best oil viscosity for the
outdoor temperature range expected:
1. Using SAE 30 at outdoor
temperatures below 40°F
(4°C) will result in hard
starting.
Engine Oil Capacities
Model
38803
1. Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill. (Figure 19).
2. Install the dipstick securely.
Figure 18
2. Using 10W-30 at outdoor
temperatures above
80°F (27°C) may result in
increased oil consumption;
therefore, check the oil
level more frequently in
these circumstances.
Engine Oil Capacity
0.77 to 0.83 L (26 to 28 oz)
Figure 19
Note: Do not spill oil around the oil fill tube; oil could
leak onto traction parts and cause the traction to slip.
7

Checking the Tire Pressure

No Parts Required
Procedure
The tires are overinflated at the factory for shipping. Reduce
the pressure equally in both tires to between 16 and 137 kPa
(117 and 20 psi).
8
Checking the Skids and
Scraper
No Parts Required
Procedure
Refer to Checking and Adjusting the Skids (page 22).
9
Checking the Traction Drive
Operation
No Parts Required
Procedure
CAUTION
If the traction drive is not properly adjusted, the
machine may move in the direction opposite of
what you intended, causing injury and/or property
damage.
Carefully check the traction drive and adjust it
properly, if necessary.
Note: To check the traction drive operation, the self-propel
feature must be engaged by ensuring the wheels are pinned
in the axle. Refer to Freewheeling or Using the Self-propel
Drive (page 14).
12