Owner's Manual
E
4

Advertising

   Related Manuals for Korg CX-3 Combo Organ

   Summary of Contents for Korg CX-3 Combo Organ

  • Page 1

    Owner's Manual...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS THE FCC REGULATION WARNING (for U.S.A.) This equipment has been tested and found to comply with the 1) Read these instructions. limits for a Class B digital device, pursuant to Part 15 of the 2) Keep these instructions. FCC Rules.

  • Page 3

    Thank you for purchasing the Korg CX-3 combo organ. To ensure trouble-free enjoyment, please read this manual carefully and use the instrument as directed. About this owner’s manual How this manual is organized, and how to use it Please read this manual carefully to learn important points and basic operation.

  • Page 4: Table Of Contents

    Table of Contents Introduction ........5 Vibrato and chorus ............. 20 Overdrive ..............20 1. About the CX-3 ............5 7. Saving your data ..........20 Main features ............... 5 Writing to internal memory ......... 20 The modes of the CX-3 ..........5 Writing a program ............

  • Page 5: Main Features, About The Cx, The Modes Of The Cx

    In this mode you can make settings that affect the (Resonant structure and Electronic circuit Modeling entire CX-3, such as master tune, transpose, and System) is KORG’s proprietary sound modeling technology global MIDI channel. which precisely reproduces the complex character and nature of both acoustic and electric instruments as well as electronic circuits in real world environments.

  • Page 6: Front Panel, Parts Of The Cx-3 And What They Do

    Introduction 2. Parts of the CX-3 and what they do Front panel PHONES jack 1. [EXPRESSION/OVERDRIVE] knob 3. DRAWBAR section This simultaneously adjusts the volume and distor- Drawbar 1, Drawbar 2 tion. At low volumes, the low frequency and high Drawbar 1 is at the left, and Drawbar 2 at the right.

  • Page 7

    Introduction 4. [DISPLAY] key To change the split point, use the Group 7 “Split Point” parameter. The contents of the display will change each time you press this key. Since you can assign a separate MIDI channel to the upper and lower keyboards, you can connect an The display will differ between Normal mode and EX external MIDI keyboard to the CX-3 and use the mode.

  • Page 8

    Introduction 9. [EX MODE] key 11. ROTARY section Press this key to enter EX mode. Here you can control the rotary effect. For details, refer to “5. Rotary” (p.19). 10. DRAWBAR SELECT section The upper three drawbar select keys are for the upper keyboard, and the lower three are for the lower keyboard.

  • Page 9: Rear Panel

    “5. Operation of included Expression pedal” (p.44). 3. ASSIGNABLE PEDAL/SW 1, 2 jacks On/off-type pedal switches (separately sold Korg PS- 1 pedal switches), or separately sold Korg EXP-2 foot controllers or XVP-10 expression/volume pedals can be connected to these jacks. 4. OUTPUT L, R jacks Connect these jacks to the INPUT jacks of your amp or mixer.

  • Page 10: Power Cable Connections, Output Jack Connections, Midi Connections, Pedal Connections

    CX-3, and then plug the other end of the ASSIGNABLE PEDAL/SW jacks cable into an AC outlet. You can connect a separately sold Korg PS-1 pedal switch to these jacks, and use them to switch the 2. OUTPUT jack connections...

  • Page 11: Listening To The Demo Songs

    1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3...

  • Page 12

    Quick Start 3. Play the keyboard. 5. While you play the keyboard, pull out the Drawbar You will hear the sound specified by the “UPPER” 1 bars to create the sound you want. parameters of the program. When you pull out the various bars of Drawbar 1, the pitch (footage) printed on the front of each bar will be If you are using the Split function, notes to the right added to the sound played by the keyboard.

  • Page 13: Selecting A Program

    Quick Start 3. EX mode If you are using the Split function, the notes to the right of the split point will be the upper keyboard, and the notes to the left of (and including) the split point will be the lower keyboard. The [DRAWBAR PRESET] key will automatically be Selecting a program selected for the lower keyboard, and the lower...

  • Page 14: Split Function

    Quick Start 4. Split function eters in EX Edit mode. The content of each type is specified by the Global mode parameters “Ex Draw- bar Type 1-1” through “Ex Drawbar Type 4-4.” If you You can divide the CX-3's keyboard into upper and lower want to check the footage that is assigned to each bar, areas to play the UPPER and LOWER tone generators use EX Edit mode to check which type is used, and...

  • Page 15: Basic Functions, About The Display, Switching The Display, Drawbar Levels And Icons

    1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3...

  • Page 16: Normal Edit Mode / Ex Edit Mode

    Basic functions : Percussion icon SELECT section, calibrate a connected pedal, and adjust the settings for the wheel break function. This indicates that the “DB Preset's Perc” parameter is • Group 8: Use this parameter to play the demo set to Ena (Enable). songs.

  • Page 17: How A Program Is Structured, About The Programs, Initializing One Program, Initializing All Programs

    Basic functions 2. About the programs 3. Restoring the factory The CX-3 contains 128 preset programs (64 for Normal settings mode, and 64 for EX mode). In both Normal mode and EX mode, the programs are The CX-3 lets you re-initialize either the programs or the organized into banks A–H, with eight programs in each Global parameters back to their original factory settings.

  • Page 18: Initializing The Global Parameters, Initializing Programs And Global Parameters, Checking The "db Preset's Perc" Parameter

    Basic functions 4. Percussion 5. Press the [WRITE/ENTER] key . A message will ask you whether you want to initialize all the programs. When playing the upper keyboard, you can use the front To cancel the procedure, press the [EXIT] key. panel PERCUSSION keys and drawbars to add percus- sion.

  • Page 19: Ex Percussion In Drawbar

    Basic functions 5. Rotary Since the “DB Preset's Perc” parameter is set inde- pendently for each program, you will have to check each program to see whether percussion can be used The ROTARY Speaker section replicates the sound of the for that program.

  • Page 20: Writing To Internal Memory, Saving Your Data, Writing A Program, Vibrato And Chorus

    Basic functions 6. Effects 7. Saving your data Program parameter settings and Global parameter settings of the CX-3 can be saved by writing a program or transmitting a MIDI data dump. Reverb You can use the front panel [REVERB OFFSET] knob to adjust the depth of reverb.

  • Page 21: Editing The Sound, Writing The Global Parameters

    Basic functions 8. Editing 4. Press the [WRITE/ENTER] key . When the data has been written, the display will indicate Write Completed. You can edit the tone or name of the selected program. When editing a program, it is a good idea to start by selecting the program that is closest to what you have in Writing the Global parameters mind, and make your changes from there.

  • Page 22: Other Parameters, Editing The Drawbar Parameters, Copying Drawbar Parameters

    Basic functions This parameter simulates the noise that occurs when a 4. Move the bars of the Drawbar 1 or Drawbar 2 key is pressed. Here you can adjust the volume of that sections (you may use either) to adjust the draw- noise.

  • Page 23: Swapping Two Programs, Copying A Program

    Basic functions 4. In the upper DRA WBAR SELECT section, hold 6. To change the copy-destination, press the [ ®] key down the [DRA WBAR 1] key and press the [DRA W- once, and then use the [-][+] keys to specify the BAR PRESET] key .

  • Page 24: Editing The Name Of A Program

    Basic functions Editing the name of a program 1. Press the [EDIT] key to enter Normal Edit mode or EX Edit mode. 2. Press the PROGRAM [8] key . “Rename” will appear in the left of the display, and the program name will be displayed in square brack- ets [ ].

  • Page 25

    1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3...

  • Page 26

    Parameters LOWER (Lower Drawbar Level) [0...8] Ex Drawbar Type [1...4] This is displayed in Normal Edit mode. This is displayed in the EX Edit mode. Here you can specify the volume of the footage used By selecting the type, you can specify the pitches that are when you play the lower keyboard in Normal mode.

  • Page 27

    Parameters ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Group 4: Amp Group 5: Reverb Amp Type...

  • Page 28

    Parameters ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Rotor Up Transit (Rotor Up Transition) [0...99] Group 7: Controller Adjusts the time over which the rotor rotation changes from slow to fast.

  • Page 29

    Parameters Rtry FAST Ctrl (Rotary FAST Controller) Amp Gain Ctrl Min (Amp Gain Control Minimum) [Off, Pedal 1/(Pdl1)*, Pedal 2/(Pdl 2)*] [0...99] Pedal 1: A pedal switch etc. connected to the rear panel Specify the minimum setting of the Normal Edit mode ASSIGNABLE PEDAL/SW 1 jack will turn the ROTARY and EX Edit mode Group 4 “Amp Gain”...

  • Page 30

    Parameters Rtry Speed (Rotary Speed): The “Horn Fast Speed,” “Horn Slow Speed,” “Rotor Fast Speed,” and “Rotor Slow Speed” parameters (Group 6) will be controlled. Wheel Brake: The “Wheel Brake” parameter (Global mode Group 7) will be controlled. When MIDI Modula- tion Wheel control change messages are received, the wheel brake will be turned On for a value of 127 (7Fh), and normal for a value of 0 (00h).

  • Page 31: Global Mode

    Parameters ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 2. Global mode Group 1: Basic In Global mode, you can press the PROGRAM [1]–[8] Master Tune [430.0 Hz...450.0 Hz] keys to directly select the first parameter in each Group Adjusts the overall pitch in 0.2 Hz steps, with A4 (middle...

  • Page 32

    Parameters Prog Up Ctrl (Program Up Controller) MIDI Upper 2nd ch (MIDI Upper 2nd Transmit [Off, Pedal 1/(Pdl 1), Pedal 2/(Pdl 2)] Channel) [1...16, Off] Pedal 1: The pedal switch connected to the rear panel Specifies the channel on which the UPPER keyboard will ASSIGNABLE PEDAL/SW 1 jack will switch programs.

  • Page 33

    Parameters MIDI Rx C. Change (MIDI Receive Control Change) CC# Drawbar 1 5 ’(MIDI CC# Drawbar 1–5-1/3’) [Dis, Ena] [1...31, 33...95, Off] Dis (Disable): Incoming MIDI control changes will be Specifies the MIDI control change number that will be ignored. used to transmit and receive the 5-1/3' setting of Drawbar Ena (Enable): Incoming MIDI control changes will be 1.

  • Page 34

    Parameters CC# Drawbar 2 4’(MIDI CC# Drawbar 2–4’) CC# V/C UPPER (MIDI CC# V/C Upper) [1...31, 33...95, Off] [1...31, 33...95, Off] Specifies the MIDI control change number that will be Specifies the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 2. used to transmit and receive the setting of the VIBRATO/ (The factory setting is 73.) CHORUS section [UPPER] key.

  • Page 35

    Parameters ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Group 6: Ex Drawbar Set Group 7: Utility Ex Drawbar Type 1-1...

  • Page 36

    Parameters ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Default DB Select (Default Drawbar Select) Group 8: DEMO [PRESET, 1, 2] This controls which settings in the DRAWBAR SELECT DEMO Play [1...9] section will be active when the power is turned on.

  • Page 37

    1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3...

  • Page 38: Connecting A Midi Keyboard

    Appendices ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Local Control On setting When using a velocity-sensitive MIDI sound module...

  • Page 39: Midi Channels

    Appendices 3. Press the PROGRAM [7] key, and then press the leave a suf ficient interval of time between each data [®] key twice. dump transmission. The display will indicate Dump. Type of data Time required to write into memory 4.

  • Page 40: Pitch Bend, Control Change

    Inquiry Message with content that applied. The range in which pitch bend will occur can be signifies “I am a Korg CX-3, system version ...” specified by the Global mode Group 3 “MIDI P . Bend Transmitting sound settings and other data (Data Dump) Range”...

  • Page 41

    Appendices • In Global mode, a data dump can be performed when the Dump Pr ogram, Dump All Pr ogram, Dump Global, or Dump All Pr og+Global commands are displayed. A data dump will also be transmitted when a dump request is received if the “MIDI Rx Sys Exc”...

  • Page 42: Voice Name List

    Appendices 3. Voice name list...

  • Page 43: Troubleshooting

    Appendices 4. Troubleshooting Pedal switch or expression pedal connected to the rear panel does not operate as you intend • Is Pedal 1 or Pedal 2 selected for the Global mode Power does not turn on Group 1 “Prog Up Ctrl” or “Prog Down Ctrl” param- •...

  • Page 44: Expression Pedal

    Appendices 5. Operation of included Cable storage Store the cable as shown. Expression pedal Fortissimo function This allows you to selectively emphasise parts of your performance. As shown in the diagram, the pedal angle is 30° when fully raised. The pedal will rest at any point you take your foot of f from fully raised to standard position.

  • Page 45: Specifications And Options

    Appendices 6. Specifications and options Power consumption 14 W Tone generator section Included items Tone generator: Tone wheel organ modeling tone Power cable, Expression pedal, Stand STD-BX3 generator Options Polyphony: Full keyboard polyphony XVP-10 EXP/VOL pedal, EXP-2 Foot Controller, PS-1 Modes Pedal Switch, MIDI cable Normal mode, EX mode, Normal Edit mode, EX Edit...

  • Page 46: Midi Implementation Chart

    *3: Received when Global mode MIDI Rx Prg Chng parameter is set to "Ena". *4: Received when Global mode MIDI Rx Sys Exc parameter is set to "Ena". *5: In addition to Korg exclusive messages, Inquiry and Master Volume are supported. Mode 1: OMNI ON, POLY...

  • Page 47

    Appendices Index Amp ..................Normal Edit mode ..............Chorus ..................Overdrive ................Click Level ................Connection ..............10, 37, 38 Controller ................Percussion............... 18, 26 Copy ................22, 23, 35 Program ................... EX mode ................How a program is structured ......... 1 7 Data dump ...............

  • Page 48

    Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty. KORG INC. 15-12, Shimotakaido 1-chome, Suginami-ku, Tokyo, Japan      1405 EH Printed in Japan 2002 KORG INC.

Comments to this Manuals

Symbols: 0
Latest comments: