Korg CX-3 Combo Organ Owner's Manual page 30

Parameters
Rtry Speed (Rotary Speed): The "Horn Fast Speed,"
"Horn Slow Speed," "Rotor Fast Speed," and "Rotor Slow
Speed" parameters (Group 6) will be controlled.
Wheel Brake: The "Wheel Brake" parameter (Global
mode Group 7) will be controlled. When MIDI Modula-
tion Wheel control change messages are received, the
wheel brake will be turned On for a value of 127 (7Fh),
and normal for a value of 0 (00h).
ExLm Level (EX Lower Manual Level): The volume of
the lower keyboard in EX mode will be controlled.
Mod Wheel Range (Modulation Wheel Range)
[-99...+99]
If you set the "Mod Wheel" parameter to other than No
Assign, Rtry FAST, or Wheel Brake, incoming MIDI
Modulation Wheel control change messages will control
the specified effect over a maximum range between 0 and
99.
When the modulation wheel is at the minimum position,
the selected parameter will have the value that was
specified for it.
When the modulation wheel is at the maximum position,
the value you specify here will be added to the value of
the selected parameter. However, the resulting value will
not exceed a range of 0 to 99.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Group 8: Program Name
Rename
Here you can modify the name. You can use up to twelve
characters.
Use the [√ ][®] keys to select the character that you wish
to change, and use the [–]/[+] keys to select the character.
The following characters can be used.
30