Plug Replacement - Titan TTB059VAC Safety And Operating Manual

TVC100P-M-070924.indd 12

PLUG REPLACEMENT

If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows.The wire which is coloured
blue must be connected to the terminal which
is marked with N. The wire which is coloured
brown must be connected to the terminal which
is marked with L.
Warning: Never connect live or neutral wires to
the earth terminal of the plug. Only fit an approved
BS1363/A plug and the correct rated fuse.
Note: If a moulded plug is fitted and has to be
removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
BLUE
N (NEUTRAL)
OUTER
SLEEVE
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
2007-9-24 19:30:05