How To Use Ddns - Ipcam IP Camera User Manual

IPCAM User Manual
Figure7.9
Access the IP Camera from the Internet
User can access the IP Camera from the Internet, Enter WAN IP address + port number
in the IE to access IP Camera. For example, Http:// 116.25.51.115:8999
Note: Make sure the Port mapping is success. You can do port mapping by two ways:
Enter setting page of the router which IPCAM connect with to enable UPNP function.
Enter IPCAM "UPnP Settings" to enable UPNP and make sure the state is "UPnP
success".
If your router has the Virtual Map function. Enter router setting page, add IP CAM‟s IP
and port to the Virtual map list.

4.5 How to use DDNS

When use ADSL, the IP Camera will connect to the Internet through ADSL automatically.
For each ADSL reconnection, ISP will re-assign a new IP address for the IP Camera to
facilitate the access. DDNS( ) can map the dynamic IP
Dynamic Domain Name Server
address of an IP Camera to a fixed domain name. Therefore, we can access the IP
Camera by the fixed domain name whether the IP address changes or not. The IP
address is not necessary when you using the DDNS via the domain name to find your
network.
1) Go to the website which Provides free domain name, register and apply a free domain
name. such as http://www.dyndns.com(details:5.1.6 ).
48 / 67