Activating Covert Mode; Setting To Vibrate In Covert Mode; Man Down - Motorola MTP830 S Feature User Manual

Feature User Guide
• Backlight is set to Disabled (corresponding to Backlight menu entry).
• The LED indicator switches off.
The radio powers up in the mode set before turning off. Thus if the Covert Mode was set before turning off, the
radio turns on in the Covert Mode .
When the Covert Mode is turned off all the changed settings are reverted to the previous state.
This feature can be used as the One-Touch Button.

5.6.8.1 Activating Covert Mode

Procedure Steps
1 From the home screen, press MENU key.
2 Select Security → Covert Mode.
3 Select one of the following:
• On — all tones are set to off, and the backlight and the LED are disabled immediately. The group audio
is routed to the earpiece. The radio displays Covert Mode On.
• Off — all settings for tones, backlight and audio are restored. The radio displays Covert Mode Off.

5.6.8.2 Setting to Vibrate in Covert Mode

Procedure Steps
From the home screen, press MENU key.
1
2 Select Security → Covert Mode → Vibrate.
Select one of the following:
3
• On — To restore all vibrations.
• Off — To disable all vibrations.

5.7 Man Down

This feature monitors the state in which the radio is. The radio alerts you when:
• its tilt exceeds a predefined angle value.
• it remains static for a predefined time.
If you do not change the state of the radio or press the PTT, the radio switches to the Emergency Mode.
For the easier localization of the radio, visual and audible indications are started until they are deactivated. If the
Emergency Hot Microphone is on, the additional audio indication is not played.
To exit Man Down, exit the Emergency Mode by pressing and holding Exit or press PTT.
5-24 -