Setting Talkgroups In The Active Scan List; Setting Scan Lists - Motorola MTP830 S Feature User Manual

Select More . . . → Group Setup → Scan → Scanning.
2
3 Select Select List and then a list name.
Step result: Your radio displays list name Selected.
4 Select Scanning → On.
Result: Your radio is scanning on the predefined scan list.
Scan

5.9.1.2 Setting Talkgroups in the Active Scan List

When and where to use: If you want to edit talkgroups in the active scan list.
Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Group Setup → Scan → Active List.
If Scanning is Off is displayed, go to More . . . → Group Setup → Scan → Scanning → On to
enable scanning.
3 Select View and highlight the required talkgroup.
4 Press MENU.
Select one of the following:
5
• Delete — Erases this group from the active scan list.
• Priority and select new priority to Low, Medium or High.

5.9.1.3 Setting Scan Lists

When and where to use: If you want to set up any scan list.
Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Group Setup → Scan → Scan Lists.
-
5.9.1.2 Setting Talkgroups in the Active Scan List
5-43