Table of Contents
Advertisement
Transmit/Receive LED
Short blinking blue
Solid green
with long interval
Blinking blue three
–
–
Rapid Blinking blue
–
Solid blue for two
–
–
Rapid blinking blue
–
for two seconds
–
Note:
No LED indication occurs when your radio receives a clear (non-secured) transmission in trunking Mode.
LED Indicators in Dark
For covert operation, the LED can be preprogrammed to turn off
at specific zone channels. During operation in these zone
channels you do not see the LED blinking, instead you can use
Voice Announcement to hear and confirm the operation status.
Hence, It is recommended to duplicate the channel
programming into separate zone and have associated Voice
Announcement tied to zone to help indicate the LED on/off
Bluetooth LED
Radio is reading or upgrading by CPS.
Bluetooth is powering on or off.
times
Radio is waiting to be paired when no device is connected with radio in Bluetooth.
Blinking blue at
Radio is connected with at least a device in Bluetooth link.
heartbeat pace
Bluetooth device is connected or disconnected successfully.
seconds
Blinking blue
Radio is clearing Bluetooth pairing information.
Radio fails to connect or disconnect from a device.
Solid blue
Radio is powering up with Option Board error.
Mode†
Status
state, for example Light Off Zone 1. Using zone control in this
case eases going into and out of the zone channel
preprogrammed with the LED on/off setting.
19
English
Advertisement
Table of Contents
