Using High Audio; Using Low Audio; During The Call; Home Display Text Message - Motorola MTP830 S Feature User Manual

The states of the routed audio are:
• Speaker HIGH — indicates that audio is routed to the main speaker.
• Speaker LOW — indicates that audio is routed to the earpiece or PHF earpiece, and not to the main speaker.

2.24.1 Using High Audio

When and where to use: Use it when placing and receiving a Group, Phone and Private calls.
Procedure Steps
Hold your radio in a vertical position with its top microphone 5–10 centimeters away from your mouth.
1
2 Speak into the top microphone and listen through the internal speaker.
Keep the antenna at least 2,5 centimeters from your head and body.

2.24.2 Using Low Audio

When and where to use: Use it when placing and receiving a Phone, PABX, and Duplex Private calls.
Procedure Steps
1 Hold your radio as you would a telephone.
Speak into the bottom microphone and listen through the earpiece.
2
Keep the antenna at least 2,5 centimeters from your head and body.

2.25 During the Call

During the call, label of the right SOFT key indicates the next possible change. Accessory default setup is:
Table 2-11 During the Call
Soft Key Label
Spkr
Erpce
PHF

2.26 Home Display Text Message

Your radio is provided with a feature that allows your service provider to send special text messages to the display.
The message stays on the home screen until a new message is received. Power cycle your radio to replace the
Home Display message to the predefined one.
-
Audio Setting
Audio goes to the main speaker (Speaker HIGH is displayed)
Audio goes to the earpiece (Speaker LOW is displayed)
Audio goes to the Personal Hands Free (Speaker LOW is displayed)
2.24.1 Using High Audio
2-21