Eelectron TM11A01KNX Product Handbook page 21

Mode
This parameter determines which switching values is written into the memory
location of the communication object when the signal state changes at the input.
A rising edge is when the signal state at the input changes from logic "0" to "1"
while a falling edge is a change from logic "1" to "0".
Options:
Rising ON
Rising OFF
Falling ON
Falling OFF
Rising ON / Falling OFF
Rising OFF / Falling ON
Toggle ON/OFF
Toggle OFF/ON
With this parameter we can program which status we need to send to the bus
(ON/OFF; TOGGLE) when a rising or falling edge is detected in the input signal.
Behaviour:
"Rising On": A rising edge causes a logic "1" to be transferred to the
communication object. A falling edge does not alter the object value.
"Rising Off": A rising edge causes a logic "0" to be transferred to the
communication object. A falling edge does not alter the object value.
"Falling On": A falling edge causes a logic "1" to be transferred to the
communication object. A rising edge does not alter the object value.
"Falling Off": A falling edge causes a logic "0" to be sent to the communication
object. A rising edge does not alter the object value.
"Rising On, Falling Off": A rising edge causes a logic "1" to be transferred to the
communication object. A falling edge causes a logic "0" to be sent.
"Rising Off, Falling On": A rising edge causes a logic "0" to be transferred to the
communication object. A falling edge causes a logic "1" to be sent.
"Toggle ON/OFF": Each rising edge causes the object value to be inverted. This
means that a logic "1" is sent to the communication object after the first rising
edge. The next one sends a logic "0" and so on. A falling edge does not alter the
object value.
"Toggle OFF/ON": Each falling edge causes the object value to be inverted.
This means that a logic "1" is transferred to the communication object after the
first falling edge. The next one sends a logic "0" and so on. A rising edge does
not alter the object value.
21 di 30
Pagina