Ulx System Components - Shure ULXS4 User Manual

ULX System Components

All systems include either a ULXS4 Standard
Diversity Receiver or ULXP4 Professional
Diversity Receiver.
Bodypack systems include a choice of lavalier,
headworn, or instrument microphones.
WH30, WCM16, WBH53/54
WB98H/C
WL93, WL183/184/185, WL50/51
Antennas
Active Antennas
The antenna connectors on the
ULX receiver provide 12 V DC for
active circuit antennas.
Caution: Use only Shure antenna accessories
to ensure the best operation. Do not use split-
ters, combiners, or antennas that provide a
DC ground, as this can cause the receiver to
function improperly.
Antenna Combiners and Accessories
The supplied antennas can be connected directly to the
BNC-type ANTENNA connectors. However, optional antenna
mounting accessories from Shure can improve reception and
reduce rack clutter. Use the following guidelines:
• Antennas and receivers must be from the same band.
• Mount antennas more than 40 cm (16 inches) apart.
• Use Shure UA825 or UA850 low-loss coaxial antenna cable
(or any 50 ohm, low-loss cable such as RG-8U).
Visit www.shure.com for more information on wireless antenna
accessories.
Handheld systems include a choice of inter-
changeable microphone heads.
SM58, SM86, SM87A,
Beta 58, Beta 87C
Guitar systems include a 1/4" to mini 4-pin
cable.
WA302
Coaxial Cables
Front Mount Antenna Kit
1/2-Wave Antenna included with ULXP4
systems
Inline Antenna Amplifier
for long antenna cable runs
ULXP4 receivers include rack-mounting
hardware.
UA507
FULL RACK MOUNT HARDWARE
UA506
1/2 RACK MOUNT HARDWARE
Antenna Rack Mount Kit
Active Directional Antenna
for more focused reception
Distribution Amplifier
combines antennas and power supplies for
multiple receivers
3