Art.2301N; Entrances Exchanger For Vx2300 Digital Systems - Videx VX2300 User Manual

Art.2301N

Fig.1
DESCRIPTION
This unit is required for systems with 2 or more entrances (4 maximum). The Art.2301N has 4 inputs (IN1..IN4) each with adjustable amplification ("L" =
low, "M" = medium and "H" = high) to compensate for different door station distances. The AUX input enables a second 2301N device to be connected
to expand the system up to 8 entrances. When connecting 2x2301N the polarity of the bus between the Art.2301N's must be observed. When connect-
ing 2x2301N's the BUS output of the first exchanger must be linked to the AUX input of the second exchanger and then onto the apartments. The polari-
ties are not relevant if there is only one 2301N.
The power supply inputs are PS1and PS2. The Art.2321/P with its jumper set to V2 should be used. For systems with up to 4 entrances and 50 video-
phones only one power supply is required connected to PS1. For larger systems connect a power supply to each of the two inputs (PS1 & PS2).
When 2x2301N, the 2x2321/P power supplies only connect to the 2301N at which the AUX connection is used. (The one supplying the apart-
ments).
CONNECTION TERMINALS AND JUMPERS
Terminal/Jumper Description
BUS-
BUS Output (observe the polarities only when linked to the AUX input of a second 2301N)
BUS+
AUX-
Auxiliary BUS input to carry out systems up to 8 entrances linking together two 2301N (observe the polarities when connect-
ing the BUS output of the first exchanger to the AUX of the second BUS- with AUX- and BUS+ with AUX+)
AUX+
IN1 Door station input 1 (the signal may be amplified by the relative jumper – L=Low, M=Medium and H=High)
IN2
Door station input 2 (the signal may be amplified by the relative jumper – L=Low, M=Medium and H=High)
IN3 Door station input 3 (the signal may be amplified by the relative jumper – L=Low, M=Medium and H=High)
IN4
Door station input 4 (the signal may be amplified by the relative jumper – L=Low, M=Medium and H=High)
PS1 Power Supply input 1 (use Art.2321/P set to V2 voltage level)
PS2 Power Suppy input 2 (use Art.2321/P set to V2 voltage level)
SPECIFICATION
Housing/Mounting 9 Module A Type DIN box / DIN Bar or directly to the wall
Push Buttons N/A
Programming N/A
Controls Signal amplification on 3 levels for each bus input
Power Supply From specific power supply or from the bus
Working Temperature -10 +50ºC
CUSTOMER SUPPORT INFORMATION
All Countries Customers
VIDEX Electronics S.p.A.
www.videx.it
Tel.+39 0734 631669
Fax +39 0734 632475
The product is CE marked demonstrating its conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) and 93/68/EEC (CE marking).
PrtCode:VX2300_2_9.doc – Pag.32

Entrances exchanger for VX2300 digital systems

– technical@videx.it
VX2300 2 Wire Video Digital System
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distribui-
to liberamente all'interno dei paesi membri dell'unione europea EU.
Questo prodotto è conforme alle direttive Europee
89/336/EEC & 92/31/EEC (EMC),
73/23/EEC (LVD) e 93/68/EEC (Marcatura CE).
08/03/2011
UK Customers
VIDEX Security LTD
www.videx-security.com
Tech Line 0191 224 3174
Fax 0191 224 1559
Fig.2
Rev.2.9