Panasonic WJ-GXE100 Installation Manual page 10

Avoid placing receptacles that contain liq-
uids such as water near this product.
If liquid spills onto the unit, it may cause fire or
an electric shock.
Unplug the power plug immediately and con-
tact qualified service personnel for service.
Avoid placing the product in unstable
positions.
Injury or accidents may result if the product falls
down or topples over.
Avoid moist or dusty places to install this
system.
Failure to observe this may cause fire or electric
shock.
Turn the power off when cleaning of this
product.
Failure to observe this may cause injury.
Do not block the ventilation areas.
Doing so can cause fire since it can raise the
temperature inside this product high.
[Precautions for use]
This product is designed to be used
indoors. This product is not operable out-
doors.
This product has no power switch.
When turning off the power, disconnect the
power supply from the 12 V DC power supply
or the PoE device. (When using both the
12 V DC power supply and the PoE device for
power supply, disconnect both the connec-
tions.)
Use in environments below 0 °C {32 °F}
If you install this product or turn on the power
of this product in temperatures below 0 °C
{32 °F}, it may not start up correctly. Make sure
to only start this product when the temperature
is within the specified range.
Operations become stable approx. 30 minutes
after starting up. After stabilizing, this product
can be used in temperatures as cold as -10 °C
to 0 °C {14 °F to 32 °F}.
10
To keep on using with stable performance
Do not use this product in hot and humid con-
ditions for a long time. Failure to observe this
causes component degradation resulting in life
shortening of this product.
Do not expose this product to direct heat
sources such as a heater.
Temperature of the unit
The bottom of the unit may get hot during
operation.
When removing the unit, make sure to leave
enough time for the product to cool after turn-
ing the power off.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to this product. Failure to observe this
may cause trouble.
About the PC monitor
Displaying the same image on a monitor for a
long time may damage the monitor. It is recom-
mended to use a screen-saver.
When an error is detected, this product
will restart automatically.
This product will be inoperable for around
2 minutes after the restart just as when the
power is turned on.
Product disposal/transfer
Data saved on this product or a storage device
used with this product may lead to personal
information leakage.
When it is necessary to dispose or give this
product to someone, even when for repair, make
sure that there is no data on this product.
Cleaning this product body
Be sure to turn off the power before cleaning.
Do not use strong abrasive detergent when
cleaning this product. Otherwise, it may cause
discoloration.
When using a chemical cloth for cleaning, read
the caution provided with the chemical cloth
product.