Battery Replacement; Battery Disposal - Viper 4204 Owner's Manual

Turn Paging off: The remote will not wake up to check for mes-
sages with Paging off in the Setup Remote menu.
Turn Beeps off: The Button beeps can be turned off in the Setup
Remote menu. The command beeps still play normally.

Battery Replacement

Rear View
1
Battery
Cover
clip with the positive (+) side up. Replace the battery cover. The re-
mote control is now ready for use.
* The optional horn honk feature must be installed. If confirmation honks
are programmed off, the system will still emit one honk as an alert when
unlocking.

Battery Disposal

Directed Electronics care
s about the environment. If you need to dispose of the
battery, please do so in accordance with your municipal
requirements for battery disposal or return to Directed Elec-
tronics at: One Viper way, Vista, CA 92081 (Shipping and/or han-
dling costs are the sole responsibility of the owner/sender and will not
be covered by Directed Electronics).
30
2
Battery
Clip
+
1. Slide the battery cover up by ap-
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
from the remote control housing.
2. Gently pry up on the battery to re-
move it from the holder. Insert a new
battery into the holder and under the
© 2011 Directed Electronics. All rights reserved.