Download  Print this page

Installation; Unpacking; Mounting The Device - Xerox NC-300D Series Installation Manual

10/100base-tx to 100base-fx
Hide thumbs

Advertisement

2. Installation

2.1 Unpacking

Check that the following components have been included:
Installation guide (or contained in the product CD)
10/100 Media Converter
One AC power adapter
If any item is found missing or damaged, please contact your local reseller
for replacement.

2.2 Mounting the Device

Desktop Mounting
The media converter can be mounted on a desktop or shelf. Make sure
that there is proper heat dissipation from and adequate ventilation around
the device. Do not place heavy objects on the device.
Wall Mounting
The media converter also can be mounted on a wall. On bottom of the
device, wall mounting hole is provided for wall mounting.
Installation into Center Chassis KC-1300
The media converter also can be installed in KC-1300 center chassis. The
center chassis provides the power supply to the converter. Up to 16 units
can be installed in one chassis. Unscrew and remove the cover of the
center connector before inserting the converter into the chassis. Refer to
the operation manual of center chassis KC-1300 for more information.
-12-

Advertisement

Table of Contents
loading

  Related Manuals for Xerox NC-300D Series