Download  Print this page

Applying Power - Xerox NC-300D Series Installation Manual

10/100base-tx to 100base-fx
Hide thumbs

Advertisement

2.3 Applying Power

Before you begin the installation, check the AC voltage of your area. The
AC power adapter which is used to supply the DC power for the unit should
have the AC voltage matching the commercial power voltage in your area.
The AC Power Adapter Specifications
AC input power:
Steps to apply the power to the converters are:
1. Connect power adapter DC plug to the DC input jack located on the
back of the converter before connecting to the AC outlet.
2. To ensure against accidental disconnection, tie the DC cable with
the cable tie located the back of the converter.
3. Connect the power adapter to the AC outlet.
4. Check Power LED indication.
AC power voltage of your area, options -
Rated AC120V/60Hz DC7.5V 1A
Rated AC230V/50Hz DC7.5V 1A
Rated AC100V/50-60Hz DC7.5V 1A
Rated AC100V/50-60Hz DC5V 1A
Rated AC240V/50Hz DC7.5V 1A
-13-

Advertisement

Table of Contents
loading

  Related Manuals for Xerox NC-300D Series