Remote Only Menu; Surround, Path And Misc Control Menus - PROCEED Digital Surround Decoder User Manual

remote only menu

surround, path and
misc control menus
50
REMOTE ONLY MENU
ENTER
DISPLAY
ON SCREEN
THX
STATUS
LATE NIGHT
Press the appropriate button on the remote control (while in learning
mode), and then use the front panel
select and "fire" the appropriate IR command from the
PAV into the remote control. Repeat as necessary .
5 TO LEARN COMMANDS THAT GIVE DIRECT ACCESS TO SURROUND
MODES, SIGNAL PATHS, AND POSITIVE CONTROL OVER TOGGLE
FUNCTIONS, SELECT "DIRECT ACCESS" ON THE TEACH REMOTE MENU
Y ou may also teach special commands to the PAV remote control which al-
low direct access to the various surround modes, signal path and control
options. These may be assigned to any available button on the PAV remote
control, such as the
For example, you may find that you use the
modes most frequently . Y ou could assign a button to each of
surround off
these and never have to cycle through the other options again. Alternatively ,
you could assign specific output paths to the
direct access from the remote control. Another: definite "on" and "off" com-
mands for and
standby
over the PAV when operated from a remote zone.
The Surround, Path and Misc Control menus under the Direct Access
menus are as follows:
SURROUND
PRO LOGIC
STEREO SRND
MONO SURROUND
SURROUND OFF
MONO
Press the appropriate button on the remote control (while in learning
mode), and then use the front panel
tons to select and "fire" the appropriate IR command from the
of the PAV into the remote control. Repeat as necessary .
provides a method for directly accessing any two-digit vol-
Direct Volume
ume setting, something that owners of home automation systems such as
Audioaccess, AMX and Crestron can use in their macros. For example, a
macro called "Background Music" might be written that would
• select a particular music program on a 100-disc CD changer;
standby
a , b , c , d buttons.
pro logic
a
(rather than toggles) offer improved control
mute
PATH
MAIN
REMOTE
BOTH
RECORD
standby (enter)
and buttons to
volume +/–
of the
main display
, and
stereo surround
, , , and buttons to allow
b c d
MISC CONTROL
OPERATE
STANDBY
MUTE ON
MUTE OFF
DIRECT VOLUME
and but-
volume +/–
main display