PROCEED Digital Surround Decoder User Manual page 46

46
1 FROM THE SETUP MENU, SELECT "MODE DEFAULTS" AND ENABLE THE
FEATURE
After selecting mode defaults
that looks like this:
DEFAULTS: DISABLED
Y ou must first engage this feature by pressing
toggle
***DISABLED***
DEFAULTS: ENABLED
DISCRETE
PRO LOGIC
STEREO SRND
MONO SRND
2-CH/SRND OFF
MONO
This extra step ensures that any automated changes of output levels are
consciously chosen and therefore less likely to cause surprises. It also allows
you to disable all the surround mode defaults in one easy step, should you
decide at some future date to return to the calibrated settings for all your
routine listening.
2 SELECT THE SURROUND MODE YOU WOULD LIKE TO MODIFY
For example, when you have selected the
DTS, MPEG), you should see a screen that looks something like this:
CENTER:
REAR:
SUB:
SUB MODE:
THX:
Other surround modes may have fewer items, since only those adjustments
that are appropriate to a given surround mode are displayed. Thus,
option only on
discrete
ted on surround off .
3 ADJUST THE LEVEL OF CENTER, REAR AND SUB CHANNELS RELATIVE TO
THE FRONT LEFT AND RIGHT SPEAKERS TO SUIT YOUR PREFERENCE
volume ±
Using the
just; press ; then adjust the setting with the
enter
each setting as you go along by pressing
from the setup menu
MODE DEFAULTS
to . Then you will see:
***ENABLED***
MODE DEFAULTS
discrete
DISCRETE
0
0
0
DEFAULT
OFF
and , and both
pro logic
buttons, move the cursor to the item you wish to ad-
enter
, you will see a screen
enter , then volume +/– to
mode (e.g., Dolby Digital,
is an
thx
and are omit-
center rear
volume ±
buttons. Save
.