PROCEED Digital Surround Decoder User Manual page 47

4 SELECT "DEFAULT," "FORCE ON," OR "FORCE OFF" AS THE SETTING FOR
YOUR SUBWOOFER IN THIS SURROUND MODE
If you simply leave this setting as
PAV/PDSD system will always use the default speaker settings from the
menu.
speakers
If you prefer to include a subwoofer for movies and remove it when listen-
ing to music, you should
figuration settings), set the movie-related surround modes for
and set the music-oriented surround modes to
subwoofer will automatically be engaged or disengaged as you change be-
tween (for example)
5 PRESS "ENTER" TO SAVE YOUR CHANGES; REPEAT FOR ALL OTHER
SURROUND MODES AS NEEDED
Note that if you change only a single surround mode, the others will re-
mains at their factory default settings of no offsets and
This will cause even offsets entered at the front panel to be reset to all ze-
ros when surround modes other than the one you changed are selected.
(All the more reason to live with the system for a while before electing to
customize it in this way . Y ou should know your preferences with a fair de-
gree of certainty before automating them to this degree.)
default for all your surround modes, the
for a biamplified system (80 Hz con-
set speakers
and
discrete stereo surround
set
sub: force on
sub: force off . This way, your
.
=
sub mode default
,
.
47