Speco VIP2P1 Instruction Manual page 4

HEREBY, SPECO TECHNOLOGIES. DECLARES THAT THIS PRODUCT IS IN COMPLIANCE
WITH THE ESSENTIAL REQUIREMENTS AND OTHER RELEVANT PROVISIONS OF
DIRECTIVE 1999/5/EC.
A COPY OF THE ORIGINAL DECLARATION OF CONFORMITY MAY BE OBTAINED FROM
SPECO TECHNOLOGIES, 200 NEW HIGHWAY AMITYVILLE, NY 11701, USA.
THIS DIGITAL EQUIPMENT
ACCORDING TO THE CLASS B LIMIT OF EN 55022.
THIS PRODUCT FULFILLS THE REQUIREMENTS FOR IMMUNITY ACCORDING TO EN 55024
AND EN 50130-4 OFFICE AND COMMERCIAL ENVIRONMENTS.
TO COMPLY WITH RF EXPOSURE COMPLIANCE REQUIREMENTS, THE ANTENNA USED
FOR THIS TRANSMITTER MUST BE INSTALLED TO PROVIDE A SEPARATION DISTANCE OF
AT LEAST 20cm (7.9in) FROM ALL PERSONS AND MUST NOT BE CO-LOCATED OR
OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
FULFILLS THE REQUIREMENTS
CAUTION
4
FOR RF EMISSION