Network Camera Setup; Basic Configuration - Speco VIP2P1 Instruction Manual

3.5 Network Camera Setup

This section describes how to configure this network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access
to the settings for Basic, Live View, Video & Image and System Configuration.
You can configure this network camera by clicking Setup in the top right-hand corner of the Live View
page. Click on this page to access the online help that explains the setup tools

3.5.1 Basic Configuration

You can see the device information in this information page.
When accessing this network camera for the first time,
the "Admin Password" dialog appears. Enter your
admin name and password, set by the administrator.
Note: If the password is lost, this network camera must
be reset to the factory default settings. See "3.8
Resetting to the Factory Default Settings".
17