Application Control - One Touch Scan - Contex GX67D Operator's Manual

Scanner Operation - Panel and Indicators
4.3 Application Control – One Touch Scan
On All Scanners:
The Application Control keys require correct installation of WIDEsystem software, scan
applications and setup definitions before they can become active. Your PC must be turned on
and running.
Descriptions of the key's intentional functionality follow below. You can however, assign
applications with other functions to any of the Application Control keys. For instructions on
configuring the keys to other applications, view WIDEsystem TOOLS Help
How it looks on scanner...
NOTE: The applications you wish to use with the buttons must be designed to recognize your
scanner device and the signals sent from its buttons so that when a button is pressed, a scan is
initiated and the result is loaded into the application triggered. Any application you assign to a
button must be specially programmed in order to work in this manner. Check your application's
documentation to verify its functionality with your scanner's one-touch-scan buttons.
What it means....
Email Application
This key is for activating an application that scans and prepares
images for sending via E-mail from the scanner.
Scan Application
This key is for activating the scanning application installed on your
PC so as to trigger a scan of the document currently loaded in the
scanner.
Copy Application
This key is for activating a scan-to-copy application installed on your
PC.
4-8