Auto Switch Off Settings; Auto Zero Settings; Zero Tracking; Key Sound Settings - acaia Coffee Scale Operation Manual

Auto Switch Off Settings [ SLEEP ]
Auto Sleep Settings can also be configured in the acaia APP.
1. The number indicates the amount of time before the scale enters sleeping mode. For example,
when 10 is selected, the scale enters sleeping mode after 10 minutes of idling.
2. Press button to toggle through the options.
3. Press and hold
confirm the selected option.
Auto Zero Settings [ 0.AUto ]
1. When Auto Zero setting is off or disabled, the initial weight on weighing pan must be less than
50% of capacity, i.e., less than 1kg for acaia Coffee Scale before the scale is turned on ;
otherwise, an error [ Er.303 ] occurs. When the error occurs, the scale would not work until the
initial weight on weighing pan is cleared.
2. When Auto Zero setting is on or enabled, the scale displays the initial weight directly regardless
whether the weight is over 50% of capacity.
Zero Tracking [ trAcE ]
Zero Tracking is a function for maintaining the zero indication within certain limits automatically.
1. OFF: It is not recommended to turn off the Zero Tracking because the zero indication would
draft easily as room temperature changes.
2. 0.5d~3d: For example, since each division is 0.1g, 3d = 0.3g. When Zero Tracking is set to be
3d, any initial weight between +/- 0.3g on the weighing pan would be zeroed out.
3. 2d is recommended in general for acaia Coffee Scale.
Key Sound Settings [ bEEP ]
Key Sound Settings can also be configured in the acaia APP.
Set the Key Sound function off to turn off the beeping sound or on to turn on the beeping sound.
Chapter 4: Configuration
button for 2 seconds until the next setting, [ 0.AUto ], is shown on LED to
16