Appendix C. Getting Firmware Version
Operations
1. Press and hold
SEt, release
2. For version 1.2(some of early birds), the LED will display rEu-1.2.
For version 1.3, the LED will display rEu-1.3.
For version 1.4, the LED will display rEu-1.4.
For version 1.5, the LED will display rEu-1.5.
For version 1.62, the LED will display UP-1.0 then rEu-1.62.
For version 1.72, the LED will display - 1.72 -.
For version 1.74, the LED will display - 1.74 -.
Appendix C. Getting Firmware Version
while turning on the scale. When the LED display shows nACAIA and then
.
22