Table of Contents
Advertisement
Electrical information
❖ Mains plug and its fuse
The supplied mains plug may be a non-rewireable type or a
rewireable type. Both types contain an approved 3 A fuse. If you
need to replace the fuse, you must use an ASTA- or BSI-approved
BS 1362 fuse, rated at 3 A and marked:
The non-rewireable plug has its fuse beneath a fuse
cover on its face. Use a screwdriver to lever off
the fuse cover, replace the fuse with a new one
and refit its cover. Never use a plug if its fuse cover
is missing.
The fuse is inside the rewireable plug. Use a
screwdriver to remove the plug's back cover, then
lever out the fuse and replace it with a new one.
Replace the plug's back cover.
If the supplied mains plug is not suitable for your mains socket-outlet,
remove its fuse and then cut the plug off the lead. Destroy the
severed plug immediately to avoid the shock hazard which would
exist if this were to be plugged into a mains socket.
Fit an appropriate mains plug on the lead. If this plug contains a fuse,
it should be as described above. If you are using a non-fused plug, an
external fuse must not exceed 5 A.
❖ Connecting to the mains supply
Your Sky+ set top box operates with 230 Volts AC, 50 Hz mains
supplies. Do not connect it to a DC power supply.
The supplied mains lead has a 2-way connector at one end and a
mains plug at the other. Insert the 2-way connector into your Sky+
set top box before you insert the plug into the mains supply.
The only way to disconnect your Sky+ set top box from the mains is
to remove the mains lead. Your Sky+ set top box must therefore be
installed near to the mains socket-outlet, which should be easily
accessible.
For information about the mains plug and its fuse, see above.
If you are in any doubt about the mains lead, its plug or its connection,
consult a competent electrician.
Sky+ User's Guide
or
AM
FUSE of correct value
E
N
L
5
Advertisement
Table of Contents
