Table of Contents
Advertisement
You will see a screen detailing the amount of videotape required to
record the selected programmes and a list of the programmes to be
copied.
This is a contents marker for your videotape. If there are more than
ten programmes, a series of screens is displayed.
Each screen is displayed for ten seconds.
Each programme marked as Copy is then played back in turn from
start to finish, preceded by its programme information screen (see
page 18).
To stop the copying process at any time, press any key.
Once copying of a programme is complete, its recording status is
changed to Copied in your Sky+ Planner screen.
Some programmes are copy-protected and cannot be copied to
your video recorder. Copy-protected programmes are marked with
a C on the programme information banner. See Displaying more
information on page 17.
Copying programmes to your video recorder happens at normal
speed. This means if a programme is two hours long, it will take two
hours to copy it to your video recorder.
Make sure you have sufficient videotape before starting the copying
process.
During the copying process, on-screen warnings about lack of disk
space for recording (which are normally displayed if disk space
management is set to Warn or Manual) will not be displayed.
Sky+ User's Guide
45
Advertisement
Table of Contents
