For Your Safety; Using Equipment Safely - Pace sky+ User Manual

Integrated personal tv recorder and digital satellite receiver
Hide thumbs Also See for sky+:
Table of Contents

Advertisement

For your safety

❖ Using equipment safely

Your Sky+ set top box has been manufactured to meet international
safety standards, but you must take care if you want to obtain the
best results and operate it safely. We recommend that you have your
digital satellite system installed by a qualified satellite-TV installer.
It is important that you read this booklet completely, especially the
safety instructions below. If you have any doubts about the installation,
operation or safety of your Sky+ set top box, please consult your dealer.
WARNING!
Remember that contact with 230 V AC mains can be lethal
or can cause a severe electric shock. To avoid this risk:
Never remove the top cover from your Sky+ set top
box. There are no user-serviceable parts inside it, but
there are some high-voltage live parts.
Make sure that all electrical connections are properly
made.
Do not connect any of your equipment (Sky+ set top
box, TV, video recorder etc.) to the mains supply
until you have properly connected all the other leads.
Disconnect your Sky+ set top box from the mains
supply before you disconnect any other equipment
from its rear panel.
Never push anything into holes, slots or other
openings in the casing of your Sky+ set top box
(except your Sky Viewing Card and Interactive card
into their respective slots).
CAUTION!
✘ Do not use or store your Sky+ set top box in hot, cold, damp
or dusty places.
✘ In order to ensure a free flow of air around your Sky+ set top
box, allow at least 10 cm of space above and on all sides
(especially between your Sky+ set top box and your TV).
Do not cover any ventilation slots.
✘ Do not place your Sky+ set top box in an enclosed cabinet
with more than one other piece of audio/video equipment
e.g. VCR or DVD.
✘ Do not pick up or otherwise move your Sky+ set top box
while it is connected to the mains supply. If you want to move
your Sky+ set top box, first disconnect it, then wait at least 30
seconds before continuing.
✘ Do not put anything on your Sky+ set top box which might spill
into it.
4
Sky+ User's Guide

Advertisement

Table of Contents
loading

Table of Contents