Optional Low Open Circuit Voltage (Ocv) Welding Modes - Red-D-Arc EXTREME 360 MAP Auto-Line Owner's Manual

8-4.

Optional Low Open Circuit Voltage (OCV) Welding Modes

Notes
OM-237 881 Page 40
Low OCV Operation
The unit can be optionally config-
ured for low open circuit voltage
(OCV) operation in Stick and
Scratch Start TIG modes. When the
unit is configured for low OCV op-
eration only a low sensing voltage
(approximately 15 VDC) is present
between the electrode and the
workpiece prior to the electrode
touching the workpiece. Consult a
Factory Authorized Service Agent
for information regarding how to
configure the unit for low OCV weld-
ing operation.