7-5. Pulsed MIG - Wire and Gas Selection Table
WIRE TYPES*
Steel
Metal Core
Stainless Steel
Aluminum
Nickel
Copper Nickel
Silicon Bronze
*Wire diameter in inches (mm). Refer to section 5-3 to change displayed units.
.
Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type and
size.
Notes
OM-237 881 Page 32
.035 (0.9) STL
.045 (1.2) STL
.045 (1.2) MCOR
.052 (1.4) MCOR
.035 (0.9) SSTL
.045 (1.2) SSTL
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
.035 (0.9) NI
.045 (1.2) NI
.035 (0.9) CUNI
.045 (1.2) CUNI
.035 (0.9) SIBR
.045 (1.2) SIBR
GAS TYPES
ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN OXY (ARGON / OXYGEN)
ARGN CO2 (ARGON / CARBON DIOXIDE)
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN (ARGON)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
ARGN HE (ARGON / HELIUM)
ARGN (ARGON)
HE ARGN (HELIUM / ARGON)
ARGN (ARGON)
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.