Javelin J210i User Manual page 25

Quick Start
General
Information
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
18
DO NOT touch the roller surface that contacts the cards.
* For information on replacing cleaning rollers, see Appendix B
CLEANING
3. Lift the cartridge lid up and remove the
adhesive cleaning roller from the cardtridge
and discard.
4. Carefully peel off wrapper from new
cleaning roller
5. Install new cleaning roller into the cartridge*.
To avoid contamination, always hold the
cleaning roller assembly by the ends.
6. Replace cleaning cartridge into printer following
the rail guides. For correct alignment, ensure
arrows line up. Ensure the assembly locks
in place.
7. Re-insert the ribbon cartridge.
8. Close cover by pushing firmly down on
both sides.
Rev. 1.5