Elba INDUCTION BUILT-IN COOKTOP Instructions For The Use - Installation Advices page 15

PROGRAM
SWITCHING OFF OF A COOKING
ZONE
This function permits to set a timer from "
99
to " " minutes for automatic turning Off the
cooking zone/s.
With the cooktop switched On:
• Select the cooking zone and set the
desired power level.
• Within 8 seconds, touch the timer keys
and
programmed zone starts blinking) and
set the timer:

By pressing the key
0
is " " .

By pressing the key
is " 30 ".
• The time can be changed at any time
following the same procedure here
above indicated (selecting previously the
cooking zone).
• To program another cooking zone,
repeat as described above.

NOTE: The led indicating the cooking
zone closest to the end of the program, is
blinking. In the case of one programmed
zone only, the led is blinking.
Now the program for automatic switching Off
is complete.
At the end of the countdown the cooking
zone will switch Off automatically, an acoustic
signal (beep) will sound (for 2 minute only),
00
" " will flash on the timer display and the
led next to the heater display will blink.
The program for automatic switch Off can be
cancelled at any time:
• by resetting the timer to "
• by pressing the
same time.
• IMPORTANT: Remember to switch Off the
zone manually.
FOR AUTOMATIC
(the led indicating the
the initial value
the initial value
00
").
and keys at the
1
"
Fig. 2.6
Fig. 2.7
Fig. 2.8
Fig. 2.9
15