Booster Function; Important Notes - Elba INDUCTION BUILT-IN COOKTOP Instructions For The Use - Installation Advices

BOOSTER FUNCTION

This function allows the cooking zone to operate at the "Booster" maximum power (above
the nominal power) for maximum 5 minutes; it could be used, for example, to rapidly heat
up large amount of water.
– The "Booster" function is always limited to a maximum of 5 minutes.
To activate the "Booster" function:
• Set the power level "
the relevant display shows "
• At the end of the "Booster" program (5 minutes) the cooking zone is automatically set
to the power level "
• Note: if a cooking zone is still hot, it is not possible to use the "Booster" function
P
and " " will flash if you try to activate. The cooking zone is automatically set to the
maximum power level ("
To deactivate the "Booster" function:
• Set a different power level on the selected cooking zone.

or
• Switch Off the cooktop.

IMPORTANT NOTES:

• The "Booster" function is not suitable for use with non water based cooking.
• Do not use this function for heating oil (e.g. deep fat frying).
Fig. 2.5
12
9
" on the selected cooking zone, then just touch the key
P
" (fig. 2.5).
9
".
9
").
until