Optical Drive Cable - HP 100B Maintenance & Serice Manual

Optical Drive Cable

Description
Optical drive cable
The optical drive cable is secured to the computer with two screws and connects the optical drive to
the system board.
Figure 6-38
To remove the optical drive cable:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the two Torx T15M3.0x6.0 screws (1) that secure the connector to the computer.
4. Disconnect the connector from the optical drive (2) and from the system board (3).
54 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Optical drive cable location
26).
Rear Cover on page
Preparing to Disassemble the Computer
27).
Spare part number
646790-001