Hard Drive Cable - HP 100B Maintenance & Serice Manual

Hard Drive Cable

Description
Hard drive cable
The hard drive cable is secured to the computer with two screws and connects the hard drive to the
system board.
Figure 6-36
To remove the hard drive cable:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the two Torx T15M3.0x6.0 screws (1) that secure the connector to the computer.
4. Disconnect the connector from the hard drive (2) and from the system board (3).
52 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Hard drive cable location
26).
Rear Cover on page
Preparing to Disassemble the Computer
27).
Spare part number
646789-001