Hard Drive Cable - HP EliteDesk 800 G3 Maintenance And Service Manual

Hard drive cable

The hard drive cable is secured with two Torx screws.
To remove the hard drive cable:
1. Prepare the computer for disassembly
2. Remove the top cover
3. Remove the hard drive
4. Disconnect the hard drive cable from the system board (1).
5. Remove the two Torx screws that secure the hard drive cable to the computer (2).
6. Lift the hard drive cable out of the computer (3).
To replace the hard drive cable, reverse the removal procedures.
(Preparation for disassembly on page
(Top cover on page 21).
(Hard drive on page 29).
20).
Hard drive cable 31