Storage; Service; Warranty - Fire Sense 61280 Owner's Manual

.
.
Gas odor with extreme yellow tipping of flame.
.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
.
Spiders and insects can nest in burner or orifices.
This dangerous condition can damage heater and
render it unsafe for use. Clean burner holes by using
.
a heavy-duty pipe cleaner. Compressed air may help
clear away smaller particles.
Carbon deposits may create a fire hazard. Clean
dome and burner screen with warm soapy water if
any carbon deposits develop.
Note: In a salt-air environment (such as near an ocean),
corrosion occurs more quickly than normal. Frequently
check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the
appearance of your heater. Apply to exterior surfaces from
the pole down. Do not apply to emitter screen or domes.

Storage

.
.
B etween uses:
.
Turn Control Knob OFF.
Disconnect LP source.
Store heater upright in an area sheltered from direct
.
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
Note: Wait until heater is cool before covering.
.
During periods of extended inactivity or when
.
transporting:
Turn Control Knob OFF.
Disconnect LP source and move to a secure,
well-ventilated location outdoors.
12
.
Store heater upright in an area sheltered from direct
.
contact with inclement weather (such as rain, sleet,
hail, snow, dust and debris).
.
If desired, cover heater to protect exterior surfaces
and to help prevent build up in air passages.
Never leave LP cylinder exposed to direct sunlight or
excessive heat.
Note: Wait until heater is cool before covering.

Service

Repair to gas passages and associated components
should be done only by a qualified service person.
Caution: Always allow
attempting service.

Warranty

heater to cool before