Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Logik L55DAB10 Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit from DAB to FM mode, press the DAB/FM button once. The display will
show FM and the frequency.

Auto Scan

To search for an FM station, press and hold the TUNE/SELECT button to start the auto scan.
The display will show "Searching ... " . Once a station has been found, the scanning will stop
automatically.

Manual Scan

To search for FM stations manually, press the TUNE/SELECT button. The display will show
"<Tuning>". Turn the VOLUME/SELECT control until your desired frequency is reached.

Audio Mode

Press the MENU button to toggle between the Stereo or Mono selection.
The unit will automatically switch between stereo and mono mode, but
you can override this and switch this function manually. This is helpful
when receiving poor signal reception.

Storing Stations

You can store up to 10 of your favourite stations to the memory. This will enable you to access
your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the
station that you would like to save, press and hold the
PRESETS button. The "Empty preset #" will show on
the display and the preset number will flash.
Turn the VOLUME/SELECT control to select your
2.
desired preset station number and then press the
TUNE/SELECT button to confirm.
3. The station will be stored and the screen will then
show "Preset # Saved".
L55DAB10_IB_110810_Zell.indd 15
15
10/08/2011 10:44 AM