5.3.2 TITLE / CH 1‐CH 16
User can set up the installed camera's name by each channel. By moving
direction key, press ENETR button, and window appears as below.
Change the name of No. 1 camera, and press ENTER after inserting the
72
name with use of mouse, or direction key at the bottom of window. Like
the picture on right side, No. 1 camera's name is changed, and stored.
Other cameras have the same way
1. To set up it by maximum 8 letters
2. Korean name not supported
3. Default : channel 1.
NOTE
(OSD : No. English capital & small letter, Special sign)
71