Table of Contents
Advertisement
TROUBLE SHOOTING
1. The system power is turn off.
Check if power cable is correctly connected .
Check if input voltage is correct.
If the system power does not turn on while power cable is correctly connected,
please contact the supplier, or manufacturer.
2. The system power is turned on, but no video is displayed on the monitor.
Check if the monitor power cable is properly connected.
Check if the monitor is turned on.
Check if the video output cable of the DVR is properly connected to the monitor.
Unplug the power cable, and plug in again.
3. The camera numbers are displayed on the screen, but the camera images
not displayed.
Check if the camera video output is correctly connected to the DVR system.
Check if the power cable is correctly connected on the camera.
Check if the video cable is working well , or not, which is connected to system
from camera.
When video is connected with various systems, weak video signal causes this
kind of problem from video distributor. In this case, the direct connection with
video of relevant camera will find the solution by solving this matter.
Turn off DVR system, and turn it on again.
4. The camera video is shown on the screen, but the system doesn't record
video.
Check if it is set to "NONE" in the record mode of the record setting mode.
Turn off the DVR, and turn it on again.
143
Advertisement
Table of Contents
