NOTE
1. Video input type should be either NTSC or PAL, Don't use two types in mix.
2. Automatic setup for 75Ω resistance 75Ω terminal resistance is set up,
automatically split into, and becomes Hi‐Z status when connected with
video output connector under input one.
CAUTION
1. Video vibration is possible when user connects BNC of camera with loop
connector without connecting input connector. Be sure to link it to camera
input connector.
2. Too much vibration is possible in case of not linking BNC connector to
camera output without connecting camera cable.
▮ VIDEO OUTPUT
Please connect DVR with monitor by video cable.
29