Table of Contents
Advertisement
5.2.3 QUALITY / 1, 2, 3, 4
The recording quality can be set up based on recording resolution
The HDD capacity differs from the setting values of 1, 2, 3, 4.
5.2.4 OVERWRITE / ON, OFF
Once HDD capacity reaches the full size, it again returns to the first stage.
It carries out the Overwrite (yes), and records continually. In setting "No",
"HDD FULL" appears at the bottom of display, and record stops.
5.2.5 PRE‐RECORD / ON, OFF
Execute, and finish the event recording, and recording time can be extended to
70
69
2~3 seconds more than set time.
NOTE
Pre‐ recording is basically set for about 2~3 seconds, though not in menu.
5.2.6 REMOTE ID / 1, 2, 3, 4, ALL
Install the various DVRs at the same place, and one remote controller can control
various DVRs respectively by granting ID to them. Only remote controller can be
used to control. Setting values are ranged into 1~4, and ALL.
Advertisement
Table of Contents
