Table of Contents
Advertisement
5.8.8. RESET
As a menu to initialize DVR system, it is changed into factory default for all setting
values user set up.
1) FACTORY RESET ( YES / NO )
In case of pressing YES button, initialization starts.
2) SET ‐ VALUE COPY ( YES / NO )
In setup of various DVR identically, user can copy one DVR setting values, and insert
the same input values.
3) SET ‐ VALUE LOAD ( YES / NO )
By executing setting values copied, user can repeatedly insert the same setting values
to various DVRS.
NOTE
For some problem on our DVR, copy the setting values, and back up it in USB.
And then send the stored USB to our e‐mail, prompt action will be taken.
109
Advertisement
Table of Contents
