DO NOT SHOCK IN MOVE, AND INSTALLATION.
▪ Please check rating voltage (standard:DC12V5A, high‐end:12V8A) before power on.
▪ Please check power off before installation.
▪ Avoid any place with moisture because of electric shock, and fire.
▪ Avoid any place with moisture, dust, or soot.
▪ Avoid any place with direct sunlight, or heating appliances.
▪ Avoid high, or low temperature.
▪ Procure sufficient air ventilation for the connection of system wiring.
▪ Don't install near to electronic devices such as radio, or TV.
▪ Install in sufficient air ventilation, and no vibration.
▪ Please take care of not putting the electric product into the cooling fan.
▪ Don't use water, or cleanser in surface cleaning to prevent an electric shock .
▪ Please clean system by dry towel in external cleaning.
▪ Do not pull power cord forcefully.
▪ Do not place any heavy objects on the main system.
▪ Do not open, or disassemble DVR without an assistance of qualified service
personnel.
▪ Please power off in case of moving DVR.
▪ Please equip with the safety facility to diminish the loss for electricity failure,
and lighting.
▪ Do not connect signal cable of camera with DVR system during camera installation.
▪ Please power off immediately, contact manufacturer, or supplier if you catch
strange scent, or smog.
5