4.8 PTZ
PTZ set up is required in menu set up, and PTZ is used for controlling camera with
PAN/TILT/ZOOM/FOCUS.
1. Press PTZ button in live divided 16 channel mode, and single channel mode
appears.
2. Press ENTER button, and move to each menu like CH, P/T, Z/F.
3. PTZ camera is controlled with LEFT / RIGHT buttons on front panel, mouse, or
remote controller.
4. To release this function, press PTZ button again.
To function above, please setup PROTOCOL, BAUDRATE, SPEED, ID from MAIN
MENU>CAMERA.
CH : Channel change
P/T : PAN & TILT control
Z/F : ZOOM & FOCUS control
49